Dell PowerEdge T440 EMC Installation and Service Manual - Page 113
Optional MicroSD or vFlash card, Removing the MicroSD card
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Figure 67. Installing the M.2 SSD module Next steps 1. Install the BOSS card. NOTE: The procedure to install the BOSS card is similar to the removing an expansion card. 2. Install the applicable air shroud. 3. Follow the procedure listed in After working inside your system. Optional MicroSD or vFlash card Removing the MicroSD card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system . Steps 1. Locate the MicroSD card slot on the vFlash/IDSDM module, and press the card to partially release it from the slot. To locate IDSDM/ vFlash module, see the System board jumpers and connectors section. 2. Hold the MicroSD card and remove it from the slot. Installing and removing system components 113