Dell PowerEdge T440 EMC Installation and Service Manual - Page 79
Installing a 2.5-inch drive into a 3.5-inch drive adapter
![]() |
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 34. Removing a 2.5-inch drive from a 3.5-inch drive adapter Next steps Install a 2.5-inch drive into a 3.5-inch drive adapter. Installing a 2.5-inch drive into a 3.5-inch drive adapter Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Remove the 3.5-inch drive adapter from the 3.5-inch hot swappable drive carrier. Steps 1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter. 2. Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter. Installing and removing system components 79
![](/manual_guide/products/dell-poweredge-t440-emc-installation-service-manual-c5db9fb/79.png)
Figure 34. Removing a 2.5-inch drive from a 3.5-inch drive adapter
Next steps
Install a 2.5-inch drive into a 3.5-inch drive adapter
.
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Remove the 3.5-inch drive adapter from the 3.5-inch hot swappable drive carrier.
Steps
1.
Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2.
Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
Installing and removing system components
79