Dell PowerEdge T440 EMC Installation and Service Manual - Page 132
Steps, Next steps, Installing the information tag
![]() |
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Steps 1. Replace the blank information tag in the new control panel with the information tag retained from the old control panel. Figure 90. Installing the information tag Figure 91. Installing the control panel assembly 2. To install the information tag, push the information tag into the control-panel slot. 3. Connect the control panel cable and the control panel USB cable to the control panel assembly. 4. Align and insert the control panel into the control panel slot in the chassis. 5. Secure the control panel to the chassis by using the screw. 6. Connect the control panel cable and the control panel USB cable to the system board. Next steps 1. Follow the procedure listed in After working inside your system. 132 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t440-emc-installation-service-manual-c5db9fb/132.png)