Dell PowerEdge T440 EMC Installation and Service Manual - Page 116
Installing optional IDSDM or vFlash card
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Figure 70. Removing the optional IDSDM/vFlash card NOTE: There are two dip switches on the IDSDM/vFlash card for write-protection. Next steps Install the optional IDSDM/vFlash card. Installing optional IDSDM or vFlash card Prerequisites Follow the safety guidelines listed in Safety instructions. Steps 1. Locate the IDSDM/vFlash connector on the system board. To locate IDSDM/vFlash connector, see Jumpers and connectors. 2. Align the IDSDM/vFlash card with the connector on the system board. 3. Push the IDSDM/vFlash card until it is firmly seated on the system board. 116 Installing and removing system components
Figure 70. Removing the optional IDSDM/vFlash card
NOTE:
There are two dip switches on the IDSDM/vFlash card for write-protection.
Next steps
Install the optional IDSDM/vFlash card.
Installing optional IDSDM or vFlash card
Prerequisites
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash connector, see
Jumpers and connectors
.
2.
Align the IDSDM/vFlash card with the connector on the system board.
3.
Push the IDSDM/vFlash card until it is firmly seated on the system board.
116
Installing and removing system components