Dell PowerEdge T440 EMC Installation and Service Manual - Page 30

Optical drive and tape drive, Ports and connectors specifications, USB ports, NIC ports, VGA ports

Page 30 highlights

• Up to 8 x 3.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives or • Up to 16 x 2.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives Optical drive and tape drive The Dell EMC PowerEdge T440 system supports: • one optional slim SATA DVD-ROM drive or DVD +/-RW drive • internal tape drives LTO5, LTO6, LTO7 and external SAS drives. Your system supports one of the following configurations: • Systems with cabled drives support one optical drive and one tape drive. • Systems with hot-swappable drives support up to one optical drive and two tape drives. Ports and connectors specifications USB ports Dell EMC PowerEdge T440 system Table 16. USB specifications Front panel • One USB 2.0-compliant port • One USB 3.0-compliant port Back panel • 4 USB 2.0-compliant rear ports • 2 USB 3.0-compliant rear ports NIC ports The Dell EMC PowerEdge T440 system supports two Network Interface Controller (NIC) ports on the back panel each with 1 Gbps configuration. NOTE: You can install up to five PCIe add-on cards. VGA ports The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell EMC PowerEdge T440 system supports one 15-pin VGA ports on the back of the system. Serial connector The Dell EMC PowerEdge T440 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. Internal Dual microSD Module or vFlash card The Dell EMC PowerEdge T440 system supports Internal Dual microSD module (IDSDM) and vFlash card. In 14th generation of PowerEdge servers, IDSDM and vFlash card are combined into a single card module, and are available in these configurations: • vFlash or • IDSDM or • vFlash and IDSDM The IDSDM/vFlash card sits in the back of the system, in a Dell-proprietary slot. IDSDM/vFlash card supports three micro SD cards (two cards for IDSDM and one card for vFlash). MicroSD cards capacity for IDSDM are 16/32/64 GB while for vFlash the microSD card capacity is 16 GB. 30 Technical specifications

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147

Up to 8 x 3.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives
or
Up to 16 x 2.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives
Optical drive and tape drive
The Dell EMC PowerEdge T440 system supports:
one optional slim SATA DVD-ROM drive or DVD +/-RW drive
internal tape drives LTO5, LTO6, LTO7 and external SAS drives.
Your system supports one of the following configurations:
Systems with cabled drives support one optical drive and one tape drive.
Systems with hot-swappable drives support up to one optical drive and two tape drives.
Ports and connectors specifications
USB ports
Dell EMC PowerEdge T440 system
Table 16. USB specifications
Front panel
Back panel
One USB 2.0-compliant port
One USB 3.0-compliant port
4 USB 2.0-compliant rear ports
2 USB 3.0-compliant rear ports
NIC ports
The Dell EMC PowerEdge T440 system supports two Network Interface Controller (NIC) ports on the back panel each with 1 Gbps
configuration.
NOTE:
You can install up to five PCIe add-on cards.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell EMC PowerEdge T440 system
supports one 15-pin VGA ports on the back of the system.
Serial connector
The Dell EMC PowerEdge T440 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant.
Internal Dual microSD Module or vFlash card
The Dell EMC PowerEdge T440 system supports Internal Dual microSD module (IDSDM) and vFlash card. In 14th generation of
PowerEdge servers, IDSDM and vFlash card are combined into a single card module, and are available in these configurations:
vFlash or
IDSDM or
vFlash and IDSDM
The IDSDM/vFlash card sits in the back of the system, in a Dell-proprietary slot. IDSDM/vFlash card supports three micro SD cards (two
cards for IDSDM and one card for vFlash). MicroSD cards capacity for IDSDM are 16/32/64 GB while for vFlash the microSD card
capacity is 16 GB.
30
Technical specifications