Dell PowerEdge T440 EMC Installation and Service Manual - Page 70
Installing the system cover
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Figure 24. Removing the system cover Next steps Install the system cover. Installing the system cover Prerequisites NOTE: Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside the system. Follow the safety guidelines listed in Safety instructions. Steps 1. Align the tabs on the system cover with the slots on the chassis. 2. Press the cover release latch, and push the cover toward the chassis until the latch locks into place. 3. Rotate the latch release lock clockwise to the locked position. 70 Installing and removing system components
Figure 24. Removing the system cover
Next steps
Install the system cover
.
Installing the system cover
Prerequisites
NOTE:
Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside
the system.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Align the tabs on the system cover with the slots on the chassis.
2.
Press the cover release latch, and push the cover toward the chassis until the latch locks into place.
3.
Rotate the latch release lock clockwise to the locked position.
70
Installing and removing system components