Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 20
Distance from projection surface to wall plate, Installation measurement tables
View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
When the diagonal image size is less than 75 inches, mount the 3-axis adjustment unit at the position marked with a stamp. Distance from projection surface to wall plate The distance (c) from the projection surface to the bottom mounting holes on the wall plate is the number given when the vertical slide is set to the base position, as shown below. Match the notch on the wall mount to the position of the stamp on the wall plate. Base position Stamp on plate Notch on mount arm Installation measurement tables Use the following table to determine which installation measurement table to use for your projector. Projector model Maximum image size (diagonal) Installation measurement table BrightLink Pro 1410Wi/1420Wi/1430Wi BrightLink 475W/485W/575Wi/585Wi/595Wi 100 BrightLink 575Wi+/585Wi+/595Wi+ WXGA PowerLite 475W/485W/575W/585W BrightLink 480i PowerLite 470/480/570/580 93 XGA The measurements may differ depending on the location where you place the projector. When projecting in Tele, the quality of the projected images may decrease. When using a WXGA projector to project images at a 4:3 aspect ratio, the images are resized automatically and the quality of the projected images may decrease. When the wall plate cover extender is installed, the minimum diagonal image size is increased to: WXGA 67" (16:10), 65" (16:9), 59" (4:3); XGA 62" (4:3), 57" (16:9), 59" (16:10). 20