Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 46
Adjust the forward/backward slide, Adjust the vertical slide
View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
E J 2. After you finish making all of the adjustments in steps to , tighten the M4 × 12 mm hexagon socket head cap bolts (×2). I Adjust the forward/backward slide 1. Loosen the M4 × 12 mm hexagon socket head cap bolts (×2), and then adjust the slider for the wall mount. M4 × 12 mm hexagon socket head cap bolts (x2) E J 2. After you finish making all of the adjustments in steps to , tighten the M4 × 12 mm hexagon socket head cap bolts (×2). J Adjust the vertical slide 1. Loosen the M6 × 20 mm hexagon shoulder bolt ( ). 2. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal shaft at the top of the wall mount ( ). Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it. Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it. Hexagonal shaft M6 × 20 mm hexagon shoulder bolt M8 hexagon bolt 3. Tighten the M6 × 20 mm hexagon shoulder bolt you loosened in the first step ( ). 46