Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 35
Determine the projection distance and pull out the slider
View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
English 8. Tighten the nut with a wrench to secure the wall plate to the wall. D Determine the projection distance and pull out the slider 1. Using the tables on pages 21 to 28, check the number for the slider measure (b). 2. Loosen the M4 × 12 mm hexagon socket head cap bolts (×2), and then pull out the slider on the wall mount. Align the slider with the measure (b+x) that is equal to the slider measure (b) plus the thickness of the projection screen (x). For an illustration of how to measure the thickness of the projection screen (x), see page 19. M4 × 12 mm hexagon socket head cap bolts (×2) Slider measure 35
35
English
8.
Tighten the nut with a wrench to secure the wall plate to the wall.
D
Determine the projection distance and pull out the slider
1.
Using the tables on pages 21 to 28, check the number for the slider measure (b).
2.
Loosen the M4 × 12 mm hexagon socket head cap bolts (×2), and then pull out the slider on the wall
mount.
Align the slider with the measure (b+x) that is equal to the slider measure (b) plus the thickness of the
projection screen (x).
For an illustration of how to measure the thickness of the projection screen (x), see page 19.
M4 × 12 mm hexagon socket head cap bolts (×2)
Slider measure