Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 37

Caution, Make sure the Touch Unit connection cable is not wired into the wall with the other cables.

Get Epson 585Wi PDF manuals and user guides View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

English 2. Insert and turn the hexagonal shaft at the top of the mount arm into the slot on the wall plate ( ). 3. Insert and turn the M8 hexagon bolt at the bottom of the mount arm into the wall plate ( ). Caution ❏ Make sure the Touch Unit connection cable is not wired into the wall with the other cables. ❏ Take care not to trap the cables between the mount arm and wall plate. Hexagonal shaft Touch Unit connection cable M8 hexagonal bolt 4. Secure the mount arm to the wall plate by tightening the supplied M6 × 20 mm cross recessed head shoulder screws (×3) with the No.3 cross-head screwdriver ( ). Then, loosely tighten the M6 × 20 mm hexagon shoulder bolt supplied ( ). M6 × 20 mm cross recessed head shoulder screws (×3) 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
37
English
2.
Insert and turn the hexagonal shaft at the top of the mount arm into the slot on the wall plate (
).
3.
Insert and turn the M8 hexagon bolt at the bottom of the mount arm into the wall plate (
).
4.
Secure the mount arm to the wall plate by tightening the supplied M6 × 20 mm cross recessed head
shoulder screws (×3) with the No.3 cross-head screwdriver (
). Then, loosely tighten the M6 × 20
mm hexagon shoulder bolt supplied (
).
❏
Make sure the Touch Unit connection cable is not wired into the wall with the other cables.
❏
Take care not to trap the cables between the mount arm and wall plate.
Caution
Hexagonal shaft
M8 hexagonal bolt
Touch Unit connection cable
M6 × 20 mm cross recessed
head shoulder screws (×3)