Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 45
Use the adjustment knob on the top to adjust the vertical tilt, Adjust the horizontal slide
View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
English 2. Turn the dark blue knob ( ) to adjust the horizontal rotation ( ). E J 3. After you finish making all of the adjustments in steps to , tighten the screws (x2) you loosened in . G Use the adjustment knob on the top to adjust the vertical tilt 1. Loosen the screw ( ) to unlock the adjustment knob. Screw 2. Turn the light blue knob ( ) to adjust the vertical tilt ( ). E J 3. After you finish making all of the adjustments in steps to , tighten the screw you loosened in . H Adjust the horizontal slide 1. Loosen the M4 × 12 mm hexagon socket head cap bolts (×2), and then adjust the slider for the slide plate. M4 × 12 mm hexagon socket head cap bolts (×2) 45
45
English
2.
Turn the dark blue knob (
) to adjust the horizontal rotation (
).
3.
After you finish making all of the adjustments in steps
E
to
J
, tighten the screws (x2) you
loosened in
G
Use the adjustment knob on the top to adjust the vertical tilt
1.
Loosen the screw (
) to unlock the adjustment knob.
2.
Turn the light blue knob (
) to adjust the vertical tilt (
).
3.
After you finish making all of the adjustments in steps
E
to
J
, tighten the screw you loosened in
.
H
Adjust the horizontal slide
1.
Loosen the M4 × 12 mm hexagon socket head cap bolts (×2), and then adjust the slider for the slide
plate.
Screw
M4 × 12 mm hexagon socket
head cap bolts (×2)