Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 39
Attach the projector to the wall mount, This may cause the case
View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
H Attach the projector to the wall mount 1. Loosen the two screws with a Phillips head screwdriver and remove the cable cover from the projector. English Screws (x2) Cable cover 2. Insert the slide plate into the wall mount from the interface side of the projector ( ). Align the 3-axis adjustment unit with the slide plate's alignment mark ( ). 3. Tighten the M4 × 12 mm hexagon socket head cap bolts (×2) ( ). Slide plate Projector interface side Bolt positions Washer Spring washer M4 × 12 mm hexagon socket head cap bolts Alignment marks Warning When installing or adjusting the wall mount, do not use adhesives to prevent the screws from loosening and do not use lubricants or oils on the projector slide plate. This may cause the case to crack and the projector to fall, resulting in personal injury or property damage. 39