Epson 585Wi Installation Guide - Ultra-Short Throw Wall Mount (ELPMB43) - Page 5
English, Make sure there are no obstacles, such as cables
View all Epson 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English • Before installing the Touch Unit, verify that the installation location meets the following conditions: • The Touch Unit can be secured to the surface with magnets or screws. • The surface is flat, smooth, and unwarped with no more than 0.2 inches (5 mm) of unevenness in any direction on the screen surface. 0.2 in. (5 mm) • When installing on a whiteboard, install the Touch Unit within the frame of the whiteboard. Correct position Incorrect position Make sure there are no obstacles, such as cables, or protruding objects such as whiteboard trays, pen holders, or thick frames in the shaded areas in the following figure. The Touch Unit will not operate correctly if anything is obstructing the infrared signal. 4.0 in. (100 mm) 0.8 in. (20 mm) 4.0 in. (100 mm) 5