Epson 7900p User Manual - Page 22
Connecting an S-Video Source
UPC - 010343852464
View all Epson 7900p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment, or you can purchase one from Epson; see page 15). 2. Connect the cable between the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 33 for instructions on connecting an audio cable. 4. If you don't need to make any other connections, see Chapter 2 or the Quick Setup sheet for instructions on turning on the projector and adjusting the image. 5. Once the projector is turned on, enter the projector's Video menu and make sure Video Signal is set to Auto; see page 74. 22 Setting Up the Projector
22
Setting Up the Projector
Connecting an S-Video Source
1.
Locate an S-Video cable (one is usually provided with your video
equipment, or you can purchase one from Epson; see page 15).
2.
Connect the cable between the S-Video connector on your player
and the
S-Video
connector on the projector:
3.
If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4.
If you don’t need to make any other connections, see Chapter 2
or the
Quick Setup
sheet for instructions on turning on the
projector and adjusting the image.
5.
Once the projector is turned on, enter the projector’s Video menu
and make sure Video Signal is set to
Auto
; see page 74.