Epson 7900p User Manual - Page 64
Setting the Remote Control ID, or select a number to match the ID of the projectors you want
UPC - 010343852464
View all Epson 7900p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Setting the Remote Control ID The remote control's default ID is zero. If you need to change it, follow these steps: 1. Press the ID button on the remote control. You see it light. 2. Press one of the numbered buttons on the remote control to select the desired ID (0 through 9). Select zero to control all projectors, or select a number to match the ID of the projector(s) you want to operate. Nine Zero The ID button's light shuts off and the new ID is registered. If you would like to check the remote control's current ID, do the following: 1. Press the ID button twice in succession. After a moment, the button flashes. 2. Count the number of flashes; this number corresponds to the remote control's ID. (If it doesn't flash, the ID is set to zero.) 64 Using the Remote Control