Epson 8300NL User Manual - Page 104
Solving Problems with the ImageorSound
UPC - 010343846029
View all Epson 8300NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Solving Problems with the Image or Sound You cannot turn on the projector. ■ If you're trying to turn on the projector using the remote control, the remote control may be switched off (there's an on/off switch on its side) or low on battery power. Try pressing the P Power button on the projector instead. ■ Make sure the power cord is properly connected, then wait for the P power light to turn orange before pressing the P Power button. The P power light flashes green for about a minute as the projector warms up, and then it remains green during normal operation. (If the lights display a different pattern, see page 100.) The projector is powered on, but not projecting an image. ■ Press the A/V Mute button on the remote control to make sure the picture has not been turned off temporarily. ■ The projector may be in sleep mode. If the P power light is orange, press the P Power button to turn on the projector. ■ The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer. ■ If you just replaced the lamp, make sure the lamp is fully inserted and the cover securely reattached, or the projector won't come on. ■ If you just turned off the projector, it may still be cooling down. Wait until the power light stops flashing and remains orange; then press the P Power button to turn the projector back on. 104 Solving Problems