Epson 8300NL User Manual - Page 76
Connecting and Configuring the Projector
UPC - 010343846029
View all Epson 8300NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Connecting and Configuring the Projector Before using the EMP software to manage your projector(s), you have have to connect each projector you want to monitor to your network and configure it with an appropriate IP address. 1. Connect the projector to your network using a commercially available 100baseTX or 10baseT network cable. Connect the cable to the ethernet port on the projector as shown. Ethernet port To network port note Make sure the Standby Mode setting in the Advanced1 menu is off, or you won't be able to view or change the projector's network settings. 2. Turn on the projector (see page 32). 3. Press the Menu button on the remote control and select Network from the Advanced2 menu. Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All Brightness Control : High Low Projector ID : 1 Set Network Set COM Port : RS-232C USB Auto setup : ON OFF BNC Sync Termination : ON OFF Reset Execute Select Network [ ]: Select [ ]: Enter [Menu]: Exit 4. If your network assigns addresses automatically, turn on DHCP. 76 Managing the Projector from a Remote Computer