Epson 8300NL User Manual - Page 108
The colors of the image are not right., There is no sound., button to raise the sound-level.
UPC - 010343846029
View all Epson 8300NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
note Because of the different technologies used, your projected image may not exactly match the colors on your laptop or computer monitor. The colors of the image are not right. ■ If you've connected equipment to the Computer 1, Computer 2, or BNC port, make sure the correct Input setting is selected in the Setting menu (see page 70). Selecting the wrong setting can cause images to appear green or purple. ■ Press the Color Mode button on the remote control; you can use the preset options to adjust the projector's brightness and color for various lighting environments. ■ You can further adjust the color using various settings in the projector's menu system (see page 68). ■ Check your computer display settings to correct the color balance. ■ As the lamp nears the end of its life, the image may become darker and the color start to deteriorate. Check the lamp timer to see how long the lamp has been in use (see page 103), and replace the lamp if necessary (see page 94). There is no sound. ■ Make sure the A/V Mute button is not enabled. ■ Use the Volume button to raise the sound-level. ■ Make sure the sound cables are connected properly (see page 29). For computer audio, the cable should be connected to the computer's headphone jack or audio out jack. ■ For computer audio, make sure the volume control on your computer is not turned all the way down or muted. On a PC, you may be able to check this by clicking the volume control in your Windows System Tray (in the lower-right corner of the screen). 108 Solving Problems