Epson PhotoPC 750Z User Manual - Page 141
Message, Explanation, E55: No ink
View all Epson PhotoPC 750Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Message Explanation Message Explanation Check Printer Connection or Printer Error. Printing Canceled Print setting is returned to default. Printing stopped because of a printer error. Clear the error (you may need to turn the camera and printer off and then on again), then start printing again from the beginning. (See your printer's User's Guide for troubleshooting information.) This message appears when you hold down the ESC button for more than 3 seconds while printing. The printer stops printing and ejects the paper. The Print menu reappears. This message appears when an error occurs while the Direct Print program is working. The settings you have made are replaced by the default settings. Press the SEL button to go back to the Print menu and enter your print settings again. E51: Another interface is active E55: No ink E56: No paper or paper jam The printer is receiving a print job through another interface. When the print job ends, the printer begins printing from the Direct Print program automatically. Printing stopped because the printer ran out of ink. Replace the ink cartridges as needed and start printing again from the beginning. (See your printer User's Guide for instructions.) No paper: Load paper in the printer and then press the printer's Load/Eject button to begin printing. (Or press the camera's ESC button for 5 seconds to cancel printing.) Paper jam: Printing stopped because paper is jammed in the printer. Turn off the printer, remove the jammed paper, and then press the printer's Load/Eject button. 9 A B Printing Directly From the Camera 9-19