Epson PowerLite 810p User Manual - Page 26
Turning On Your Equipment, Turning On the Projector
View all Epson PowerLite 810p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you've connected to it. You can turn on your computer and video equipment in any order, but if you have more than one computer or video source connected, you may have to switch to the desired source as described on page 28. Turning On the Projector Follow these steps to plug in and turn on the projector: 1. If you're projecting video, first plug in and turn on your VCR, DVD player, or other video source. (If you're projecting from a computer, go to step 2.) 2. Connect one end of the power cord to the power inlet on the back of the projector. 3. Connect the other end to a grounded electrical outlet. The P power light on top of the projector turns orange, indicating that the projector is receiving power but not yet turned on. 4. Remove the lens cap. 20 Using the Projector