Epson PowerLite 810p User Manual - Page 89

Connecting to an External Audio System, Appendix A: Connecting to Additional Equipment

Get Epson PowerLite 810p PDF manuals and user guides View all Epson PowerLite 810p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

Connecting to an External Audio System The projector's internal speakers are loud enough for most rooms. However, if your installation requires maximum volume and sound quality, you can connect the projector to external speakers or a public address (PA) system. This disables the projector's internal speakers. If you've connected multiple audio and video sources to the projector, the projector will automatically switch the audio along with the video source whenever you choose a different video source. (See "Switching Between Picture Sources" on page 28 or page 33.) To connect the projector to an external sound system, you will need an RCA-to-3.5 mm stereo audio cable, which may be included with your sound system, or may be purchased from an electronics store. Before you start, make sure the projector and speakers or PA system are turned off. 1. Connect the cable's 3.5-mm stereo miniplug to the projector's Audio Out jack. Audio Out jack 2. Connect the RCA plugs on the opposite end of the cable to the left and right jacks of your speaker or PA system. Appendix A: Connecting to Additional Equipment 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Appendix A: Connecting to Additional Equipment
83
Connecting to an External Audio System
The projector
’
s internal speakers are loud enough for most rooms.
However, if your installation requires maximum volume and sound
quality, you can connect the projector to external speakers or a public
address (PA) system. This disables the projector
’
s internal speakers.
If you
’
ve connected multiple audio and video sources to the projector,
the projector will automatically switch the audio along with the video
source whenever you choose a different video source. (See
“
Switching
Between Picture Sources
”
on page 28 or page 33.)
To connect the projector to an external sound system, you will need
an RCA-to-3.5 mm stereo audio cable, which may be included with
your sound system, or may be purchased from an electronics store.
Before you start, make sure the projector and speakers or PA system
are turned off.
1.
Connect the cable
’
s 3.5-mm stereo miniplug to the projector
’
s
Audio Out
jack.
2.
Connect the RCA plugs on the opposite end of the cable to the
left and right jacks of your speaker or PA system.
Audio Out jack