Epson PowerLite 810p User Manual - Page 76
lamp warning light is red or flashing red.
View all Epson PowerLite 810p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
warning Except as specifically explained in this User's Guide, do not attempt to service this product yourself. 70 Solving Problems The power light is flashing orange and you cannot turn on the projector. The lamp is cooling down. Wait until the light turns off and then press the Power button to turn on the projector. The power light does not come on. Make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened. The lamp warning light is red or flashing red. Replace the lamp as described on page 62. The lamp warning light is flashing orange. The lamp is almost burned out. Make sure you have a replacement lamp ready. The temperature light is flashing orange. I The projector is too hot, and is in a high-speed cooling cycle. Make sure the room temperature does not exceed 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. I The air filter may be clogged. Clean or replace it as described on page 61. The temperature light is red. I The projector is overheating, which turns the lamp off automatically. Wait until the cooling fan stops, then unplug the power cord. Plug the power cord back in and press the Power button. Make sure the room temperature is not above 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. I The air filter may be clogged. Clean or replace it as described on page 61.