Gateway E-2100 E-2100 User's Guide - Page 117
edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
View all Gateway E-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
5 Slide the drive out of the drive bay. Gateway Mid Tower Case 6 Set any jumpers on the new drive to match the old drive. See the drive documentation for further instructions. 7 Slide the new drive in, then slide the release lever toward the inside of the case. 8 Reconnect the drive cables using your notes from Step 3. The red-striped edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1 on the drive (typically on the side closest to the power supply connection). See the drive documentation for further instructions. 9 Close the case by following the instructions in "Closing the case" on page 104. www.gateway.com 111
111
Gateway Mid Tower Case
www.gateway.com
5
Slide the drive out of the drive bay.
6
Set any jumpers on the new drive to match the old drive. See the drive
documentation for further instructions.
7
Slide the new drive in, then slide the release lever toward the inside of the
case.
8
Reconnect the drive cables using your notes from Step 3. The red-striped
edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
on the drive (typically on the side closest to the power supply connection).
See the drive documentation for further instructions.
9
Close the case by following the instructions in
“Closing the case” on
page 104
.