Gateway E-2100 E-2100 User's Guide - Page 141
Reconnect the drive cables using your notes from Step 5. The red-striped
![]() |
View all Gateway E-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Gateway Micro Tower Case 7 While pulling outward on the hard drive bracket, lift the old hard drive out of the hard drive cage. 8 Set any jumpers on the new drive to match the old drive. See the drive documentation for further instructions. 9 While pulling outward on the hard drive bracket, insert the edge of the new hard drive into the drive bracket, pivot the new drive into the bracket, then pivot the hard drive cage toward the drive cage assembly. 10 Reconnect the drive cables using your notes from Step 5. The red-striped edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1 on the drive (typically on the side farthest from the power supply connection). See the drive documentation for further instructions. 11 Close the case by following the instructions in "Closing the case" on page 127. www.gateway.com 135
![](/manual_guide/products/gateway-computers-e2100-e2100-users-guide-630ffd4/141.png)