Home » HP Manuals » Laser Printers » HP 2420 » Manual Viewer

HP 2420 HP LaserJet 2400 Series - User Guide - Page 133

Fs] Dimm In Slot X, Tray Xx Open Or

UPC - 829160289205

Add to My Manuals
Save this manual to your list of manuals

Page 133 highlights

Interpreting control-panel messages (continued) Control panel message Description Recommended action REPLACE CARTRIDGE For help press alternates with Pages remaining for this supply has reached the low threshold. The printer was set to stop printing when a supply needs to be ordered. To continue printing, press (SELECT button) to exit the printer message then press (SELECT button). The message becomes ORDER CARTRIDGE LESS THAN XXXX PAGES (warning). Follow the next steps to replace the supply. 1. Open the top cover. 2. Remove print cartridge. 3. Install new print cartridge. 4. Close the top cover. TRAY XX OPEN OR EMPTY alternates with The tray cannot feed paper to the printer because tray [X] is open and must be closed for printing to continue. Check the trays and close any that are open. TRAY XX [TYPE][SIZE] alternates with To change size or type press This message states the current type and size configuration of the paper tray, and allows you to change the configuration. To change the paper size or type press (SELECT button) while the message is present. To clear the message, press the (BACK button) while the message is present. ● Set size and type to ANY if the tray is used frequently for different sizes or types. ● Set size and type to a specific setting if printing with only one type of paper. UNSUPPORTED DATA ON [FS] DIMM IN SLOT X alternates with To clear press The data on the DIMM is not supported. The DIMM might need to be replaced. Turn the printer power off before removing it. Press (SELECT button) to continue. USE TRAY XX [TYPE][SIZE] alternates with To change press / To use press The printer did not detect the type and size of media requested. The message shows the most likely type and size available and the tray in which they are available. Press (SELECT button) to accept the values in the message, or use (UP button) and (DOWN button) to scroll through the available choices. 10.XX.YY SUPPLY MEMORY ERROR alternates with For help press An error has occurred in one or more of the printer's supplies. Values of XX and YY are listed below: XX00 = memory is defective XX01 = memory is missing YY00 = black print cartridge 1. Turn the printer power off, and then turn the printer power on to clear the message. 2. If the message persists, contact an HP-authorized service or support provider (see HP customer care). ENWW Understanding printer messages 121

Section	Page
Printer basics	13
Quick access to printer information	14
User guide links	14
Where to look for more information	14
Printer configurations	15
Feature designations for the HP LaserJet 2400 series printer	15
Printer features	16
Printer parts	20
Interface ports	21
Control panel	22
Control-panel layout	22
Control-panel buttons	23
Control-panel lights	23
Printing control-panel menus	24
Using the printer Help system	24
Changing printer-control-panel configuration settings	25
Software	35
Operating systems and printer components	35
Printer drivers	36
Software for Macintosh computers	39
Installing the printing system software	40
Uninstalling the software	45
Selecting print media	46
Supported types and sizes of print media	46
Printing tasks	49
Selecting which tray is used for printing	50
Understanding tray order	50
Customizing tray 1 operation	50
Printing by type and size of media (locking trays)	51
Manually feeding media from tray 1	52
Selecting the correct fuser mode	53
Loading trays	54
Loading tray 1 (multipurpose tray)	54
Loading tray 2 (250-sheet tray)	55
Loading optional tray 3 (500-sheet tray)	57
Understanding media output options	59
Printing on envelopes	60
To load envelopes in tray 1	60
Printing on special media	62
Printing on labels	62
Printing on transparencies	63
Printing on custom-sized media or cardstock	63
Printing on letterhead, prepunched, or preprinted paper (single-sided)	64
Printing on both sides (duplexing)	66
Paper orientation for printing on both sides	66
Layout options for printing on both sides	67
To duplex by using the built-in duplexer	67
To duplex manually	68
Canceling a print job	69
Using the printer driver	70
Changing the settings for a print job	70
Changing default settings	70
Using printer-driver features	73
Printing watermarks	73
Printing multiple pages on one sheet of paper	74
Setting a custom paper size	74
Using EconoMode (draft) printing	75
Selecting print-quality settings	75
Using reduce/enlarge options	76
Selecting a paper source	76
Printing a cover, a different first or last page, or a blank page	77
Using job-storage features	78
Proofing and holding a job	78
Deleting a held job	78
Printing a private job	79
Deleting a private job	79
Managing and maintaining the printer	81
Using the embedded Web server	82
Opening the embedded Web server	82
Information tab	83
Settings tab	83
Networking tab	84
Other links	84
Using HP Web Jetadmin software	85
Using the HP Toolbox	86
Supported operating systems	86
Supported browsers	86
To view the HP Toolbox	87
Status tab	87
Troubleshooting tab	87
Alerts tab	88
Documentation tab	88
Device Settings window	88
Toolbox links	89
Other links	89
Uninstalling the HP Toolbox	90
To uninstall the HP Toolbox by using the Windows desktop shortcut	90
To uninstall the HP Toolbox by using Add/Remove Programs in the Windows control panel	90
Managing and configuring printer drivers	91
HP Web Jetadmin software plug-in	91
Customization utility	92
Configuring e-mail alerts	93
Setting the real-time clock	94
Setting the date and time	94
Checking the printer configuration	97
Menu map	97
Configuration page	97
Supplies status page	99
PS or PCL font list	99
Managing the print cartridge	101
HP print cartridges	101
Non-HP print cartridges	101
Print-cartridge authentication	101
Print-cartridge storage	101
Print-cartridge life expectancy	102
Checking the supply level	102
Cartridge-low and cartridge-out conditions	102
Cleaning the printer	104
Cleaning the outside	104
Cleaning the paper path and print-cartridge areas	104
Cleaning the fuser	105
Problem solving	107
Troubleshooting flowchart	108
1 Does the control panel display read READY?	108
2 Can you print a configuration page?	109
3 Can you print from a program?	110
4 Does the job print as expected?	112
5 Does the printer select the proper trays?	114
Solving general printing problems	116
Guidelines for using paper	120
Printing special pages	121
Clearing jams	122
Typical jam locations	122
Understanding printer messages	128
Using the printer online Help system	128
Resolving persistent messages	128
Correcting print-quality problems	140
Print-quality checklist	140
Image defect examples	140
Light print (partial page)	142
Light print (entire page)	142
Specks	142
Dropouts	143
Lines	143
Gray background	143
Toner smear	144
Loose toner	144
Repeating defects	145
Repeating image	145
Misformed characters	145
Page skew	146
Curl or wave	146
Wrinkles or creases	147
Vertical white lines	147
Tire tracks	147
White spots on black	148
Scattered lines	148
Blurred print	148
Random image repetition	149
Troubleshooting network printing problems	150
Troubleshooting common Windows problems	151
Troubleshooting common Macintosh problems	152
Troubleshooting common PostScript problems	158
General problems	158
Specific errors	158
Supplies and accessories	161
Ordering parts, accessories, and supplies	162
Ordering directly from HP	162
Ordering through service or support providers	162
Ordering directly through the embedded Web server (for printers that are connected to a network)	162
Ordering directly through the HP Toolbox software (for printers that are directly connected to a com ...	163
Part numbers	164
Paper-handling accessories	164
Print cartridges	164
Memory	164
Cables and interfaces	165
Print media	165
Control panel menus	169
Retrieve Job menu	170
Information menu	172
Paper Handling menu	173
Configure Device menu	177
Printing submenu	177
Print Quality submenu	180
System Setup submenu	184
I/O submenu	187
Resets submenu	188
Diagnostics menu	190
Service menu	191
Specifications	193
HP LaserJet 2400 series physical specifications	193
Electrical specifications	194
Acoustic emissions	195
Operating environment	196
Paper specifications	197
Printing and paper storage environment	197
Envelopes	198
Labels	200
Transparencies	200
Printer memory and expansion	201
Overview	202
Printer memory	203
To install printer memory	203
Installing CompactFlash cards	207
To install a CompactFlash card	207
Checking DIMM or CompactFlash installation	210
To verify that DIMMs or CompactFlash cards are installed correctly	210
Saving resources (permanent resources)	211
Installing an EIO card	212
To install an EIO card	212
To remove an installed EIO card	213
Printer commands	215
Understanding PCL 6 and PCL 5e printer command syntax	216
Combining escape sequences	216
Using escape characters	217
Selecting PCL 6 and PCL 5 fonts	217
Common PCL 6 and PCL 5 printer commands	218
Regulatory information	223
Introduction	223
FCC regulations	224
Environmental Product Stewardship program	225
Protecting the environment	225
Ozone production	225
Energy consumption	225
HP LaserJet printing supplies	225
Material safety data sheet	226
For more information	227
Declaration of conformity	228
Country-/region-specific safety statements	229
Laser safety statement	229
Canadian DOC statement	229
Japanese VCCI statement	229
Korean EMI statement	229
Finnish laser statement	230
Service and support	231
Hewlett-Packard limited warranty statement	231
Print Cartridge Limited Warranty Statement	233
Availability of support and service	234
HP maintenance agreements	234
Onsite service agreements	234
HP Express Exchange (U.S. and Canada only)	235
To use HP Express Exchange	235
Repacking the printer	236
To repack the printer	236
Service information form	237

Match case Limit results 1 per page

Control panel message

Description

Recommended action

REPLACE CARTRIDGE

For help press

alternates with

<current status

message>

Pages remaining for this supply has

reached the low threshold. The printer

was set to stop printing when a supply

needs to be ordered.

To continue printing, press

(

ELECT

button) to exit the printer message then

press

(

ELECT

button). The message

becomes

ORDER CARTRIDGE LESS

THAN XXXX PAGES

(warning).

Follow the next steps to replace the

supply.

Open the top cover.

Remove print cartridge.

Install new print cartridge.

Close the top cover.

TRAY XX OPEN OR

EMPTY

alternates with

<current status

message>

The tray cannot feed paper to the printer

because tray [X] is open and must be

closed for printing to continue.

Check the trays and close any that are

open.

TRAY XX

[TYPE][SIZE]

alternates with

To change size or

type press

This message states the current type

and size configuration of the paper tray,

and allows you to change the

configuration.

To change the paper size or type press

(

ELECT

button) while the message is

present. To clear the message, press

the

(

ACK

button) while the message is

present.

●

Set size and type to

ANY

if the tray

is used frequently for different sizes

or types.

●

Set size and type to a specific

setting if printing with only one type

of paper.

UNSUPPORTED DATA ON

[FS] DIMM IN SLOT X

alternates with

To clear press

The data on the DIMM is not supported.

The DIMM might need to be replaced.

Turn the printer power off before

removing it.

Press

(

ELECT

button) to continue.

USE TRAY XX

[TYPE][SIZE]

alternates with

To change press

To use press

The printer did not detect the type and

size of media requested. The message

shows the most likely type and size

available and the tray in which they are

available.

Press

(

ELECT

button) to accept the

values in the message, or use

(

button) and

(

OWN

button) to scroll

through the available choices.

10.XX.YY SUPPLY

MEMORY ERROR

alternates with

For help press

An error has occurred in one or more of

the printer's supplies. Values of XX and

YY are listed below:

XX00 = memory is defective

XX01 = memory is missing

YY00 = black print cartridge

Turn the printer power off, and then

turn the printer power on to clear the

message.

If the message persists, contact an

HP-authorized service or support

provider (see

customer

care

Interpreting control-panel messages (continued)

ENWW

Understanding printer messages

121