HP 2420 HP LaserJet 2400 Series - User Guide - Page 210
Checking DIMM or CompactFlash installation
UPC - 829160289205
View all HP 2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Checking DIMM or CompactFlash installation After installing the DIMM or CompactFlash card, make sure that the installation was successful. NOTE To verify that DIMMs or CompactFlash cards are installed correctly 1. Turn the printer on. Check that the Ready light is illuminated after the printer has gone through the startup sequence. If an error message appears, a DIMM or CompactFlash card might have been incorrectly installed. See Interpreting control-panel messages. 2. Print a configuration page (see Configuration page). 3. Check the memory section on the configuration page and compare it to the configuration page that was printed before the memory installation. If the amount of memory has not increased, the DIMM or CompactFlash card might not be installed correctly, or the DIMM or CompactFlash card might be defective. Repeat the installation procedure. If necessary, install a different DIMM of CompactFlash card. If you installed a printer language (personality), check the "Installed Personalities and Options" section on the configuration page. This area should list the new printer language. 198 Appendix D Printer memory and expansion ENWW