HP 2420 HP LaserJet 2400 Series - User Guide - Page 60
Printing on envelopes, To load envelopes in tray 1
UPC - 829160289205
View all HP 2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Printing on envelopes WARNING! CAUTION You can print envelopes from tray 1. Tray 1 holds up to 10 envelopes and supports standard or custom sizes. For printing on any size of envelope, make sure to set the margins in your program at least 15.0 mm (0.6 inch) from the edge of the envelope. The printer might print at a slower speed when printing envelopes. In addition, printing performance depends on the construction of the envelope. Always test a few sample envelopes before purchasing a large quantity. For envelope specifications, see Envelopes. Never use envelopes that contain coated linings, exposed self-stick adhesives, or other synthetic materials. These items can emit noxious fumes. Envelopes that have clasps, snaps, windows, coated linings, exposed self-stick adhesives, or other synthetic materials can severely damage the printer. To avoid jamming and possible printer damage, never try to print on both sides of an envelope. Before you load envelopes, make that sure they are flat and not damaged or stuck together. Do not use envelopes that contain pressure-sensitive adhesive. To load envelopes in tray 1 Many types of envelopes can be printed from tray 1. Up to 10 can be stacked in the tray. 1. Open tray 1 by pulling the front cover down, then pull out the media support and fold out the media extension. NOTE 2. Open the rear output bin by pulling down on the top section of the bin. Slide out the extender until it extends fully. Using the rear output bin reduces envelope curl. 48 Chapter 2 Printing tasks ENWW