HP 4100mfp HP LaserJet 4100mfp -User Guide - Page 121
Labels, Label construction, Transparencies
UPC - 725184896392
View all HP 4100mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
CAUTION CAUTION Labels To avoid damaging the product, use only labels recommended for use in laser printers. If you have problems printing labels, use Tray 1 and open the rear output slot. Do not print on the same sheet of labels more than once-peeling and adhesive contamination might result. Label construction When selecting labels, consider the quality of each component: q Adhesives: The adhesive material should be stable at 230° C (446° F), the product's maximum temperature. q Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams. q Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any direction. q Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. To print sheets of labels, see "Using labels" on page 27. Transparencies Transparencies must be able to withstand 230° C (446° F), which is the product's maximum temperature. Print transparencies to the top output bin by closing the rear output slot. Transparencies can be printed from Tray 1 or Trays 2, 3, or 4. To print transparencies, see "Using transparencies" on page 27. If you experience difficulties, use Tray 1. Make sure you remove each transparency from the output tray when it is printed to prevent sticking. To avoid damaging the product, use only transparencies recommended for use in laser printers. Paper specifications 119