HP 4100mfp HP LaserJet 4100mfp -User Guide - Page 93
X Paper Jam, Location], Insufficient, Memory, Press Start To, Continue, Too, Complex, Eio X - error lights
UPC - 725184896392
View all HP 4100mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Control panel messages (continued) Message Explanation or recommended action ##.XX.YY This message indicates a failure in the scanner device. This is not a communications failure. XX specifies the reporting systems (scanner job control, copy/send application, scanner service agent) and YY specifies the error condition. These are represented as ##.XX.YY in the event log. For example, the scanner log control can report the following errors: q Scanner FPGA initialization error q Scanner EEPROM error q Scanner sensor adjustment error q Scanner ADF upper-light error q Scanner ADF lower-light error q Scanner ADF fan motor error q Pick sensor error q Scanner sensor error q Home position error q McBSP overrun error q CCD FIFO full error Turn the power off and then turn it on again. If the error persists, call for service. 13.X PAPER JAM [LOCATION] Media has either jammed in the product or been caught in a paper tray. The control panel provides specific instructions and location information to aid in clearing the jam. q Open the top cover or tray indicated by the message. q Clear all media from the area. If necessary, remove the toner cartridge, duplexer, or trays. q If the message persists, check for media in all other areas. CAUTION Ensure that all jammed media is removed before closing the cover or tray. Open and close the top cover to clear the message. See "Clearing jams" on page 78 for more detailed information. 20 INSUFFICIENT MEMORY alternates with PRESS START TO CONTINUE The product received more data than can fit in available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Press START to print the transferred data (some data might be lost) and then simplify the print job. 21 PAGE TOO COMPLEX alternates with PRESS START TO CONTINUE The data (dense text, rules, raster or vector graphics) sent to the product is too complex. Press START to print the transferred data. (Some data might be lost.) 22 EIO X BUFFER OVERFLOW alternates with PRESS START TO CONTINUE Too much data was sent to the EIO card in the specified slot (x). An improper communications protocol may be in use. Press START to clear the message. (Data might be lost.) Check the host configuration. 22 PARALLEL I/O BUFFER OVERFLOW alternates with PRESS START TO CONTINUE Too much data was sent to the parallel port. Check for a loose cable connection and make sure to use a high-quality cable (see "Ordering information" on page 125). (Some non-HP parallel cables might be missing pin connections or might otherwise not conform to the IEEE-1394 specification.) This error can occur if the driver you are using is not IEEE-1394 compliant. For best results, use an HP driver that came with the product (see "Printer drivers" on page 58). Press START to clear the error message. (Data might be lost.) 40 EIO [X] BAD TRANSMISSION alternates with PRESS START TO CONTINUE The connection between the product and the EIO card in the specified slot has been broken. (Data loss might occur in this situation.) Press START to clear the error message and continue printing. Understanding control panel messages 91