HP 4100n HP LaserJet 4100 series printers - Getting Started Guide - Page 46

English Common printer messages (continued) Message Explanation TONER OUT TRAY [x] EMPTY [TYPE] [SIZE] TRAY 1 LOAD [TYPE] [SIZE] The toner cartridge has run out of toner. Depending on how the printer has been configured, it will either continue to print or stop. If the printer has stopped, you can resume printing by pressing GO for each job. Replace the toner cartridge. See the online user guide for information on how to configure the printer's response to toner messages. Load paper in the empty tray (x) to clear the message. If you do not load the specified tray, the printer will continue printing from the next tray with the same paper size, and the message will continue to appear. This message occurs for the following reasons: • tray 1 was requested from the application, but the tray is empty • the printer cannot find the requested size of paper in the printer If the correct paper size is loaded, the adjustments to the tray have not been set correctly, either in the control panel or on the tray itself. To set adjustments on the tray, see "Loading tray 1" on page 1-49. Load the requested paper into tray 1, or press SELECT to override the message and print on a loaded paper size. If printing does not continue, press GO. If you are trying to print A4- or letter-size paper and this message appears, make sure the default paper size is set correctly from the Printing Menu in the printer control panel and also in the software program (see the description of the Printing Menu in the online user guide). Press GO to print from the next available tray. Press -VALUE+ to scroll through the available types and sizes. Press SELECT to accept the alternate type or size. EN Control panel 1-45