HP 4100n HP LaserJet 4100 series printers - Getting Started Guide - Page 48

English Common printer messages (continued) Message Explanation TRAY 1 TYPE = [xxxx] USE [TYPE] [SIZE] INSTEAD? xx.yy PRINTER ERROR PRESS GO TO CONTINUE 13.x PAPER JAM [LOCATION] The printer has received a job under the three following conditions: • the paper type requested by the job is not available in the printer • tray 1 has been set for CASSETTE • paper has been placed in tray 1 (thus triggering tray 1's paper sensor) If you do not press any buttons, the message disappears in about 1 minute). You can take either of the following actions: • press SELECT to accept the paper type • press -VALUE+ to change the type and then press SELECT to accept the new type Note Changing the type here changes the default for tray 1 paper type in the Paper Handling Menu (see the description of the Paper Handling Menu in the online user guide). If you do not do anything during the timeout period (about 1 minute), the printer will print on the paper in tray 1. It will also change the default for tray 1 paper type in the Paper Handling Menu to the type requested by the application that sent the job. If the requested paper size or type is not available, the printer asks if it should use another paper size or type instead. Press -VALUE+ to scroll through the available types and sizes. Press SELECT to accept the alternate type or size. A printer error has occurred that can be cleared by pressing GO in the printer control panel. Paper has either jammed in the printer or has been caught in a paper tray. 1. Open the top cover or tray indicated by the message. 2. Clear all paper from the area. If necessary, remove the toner cartridge, duplexer, or paper trays. 3. If the message persists, check for paper in all other areas. Caution Ensure that all jammed paper is removed before closing the cover or tray. Open and close the top cover to clear the message. See "Paper jams" on page 1-52 for more detailed information. EN Control panel 1-47