HP 4500 HP Color LaserJet 4500, 4500 N, 4500 DN Printer - User Guide, C4084-90 - Page 105
To con the Novell NetWare parameters from the, printer control panel
View all HP 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
To configure the Novell NetWare parameters from the printer control panel 1 Press MENU until HP EIO 1 MENU displays. 2 Press ITEM until CFG NETWORK=NO * displays. 3 Press VALUE until CFG NETWORK=YES displays. 4 Press SELECT once. CFG NETWORK=YES * displays. 5 Press ITEM until CFG NOVELL=NO * displays. 6 Press VALUE until CFG NOVELL=YES displays. 7 Press SELECT once. CFG NOVELL=YES * displays. 8 Press ITEM until FRAME=AUTO * displays. 9 To configure the Novell NetWare protocol, press VALUE to select one of the frame types from the following table: Frame Type AUTO (default) EN_8023 EN_II EN_8022 EN_SNAP Description All listed Novell frame types will be allowed. Limits frame types to IPX over IEEE 802.3 frames. All others will be counted and discarded. Limit frame types to IPX over Ethernet II frames. All others will be counted and discarded. Limit frame types to IPX over IEEE 802.2 with Ethernet frames. All others will be counted and discarded. Limit frame types to IPX over SNAP with Ethernet frames. All others will be counted and discarded. 10 Press SELECT to save the value. An asterisk (*) displays. 11 If you are finished, press GO to return the printer to the READY state. - OR - See the appropriate sections for other protocols that will be used. EN Chapter 6 105