HP 4500 HP Color LaserJet 4500, 4500 N, 4500 DN Printer - User Guide, C4084-90 - Page 151
Dir > Prn, Printer is on, but is not receiving data
View all HP 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Printer is on, but is not receiving data Cause Solution The printer's READY indicator light is not lit. Press GO to return the printer to the READY state. The top cover is not closed properly. Close the top cover firmly. A printer message other than READY appears See chapter 8 for troubleshooting information. on the printer control panel. The interface cable is not correct for this configuration. Select the correct interface cable for your configuration. See the chapter on printer interfaces for more information. The interface cable is not securely connected Disconnect and reconnect the interface cable. to both the printer and the computer. The printer is not configured correctly. See chapter 6 for configuration information. The interface configurations on the printer's configuration page do not match the configurations on the host computer. Configure the printer to match your computer configuration. Your computer is not working properly. Try using an application that you know works properly to check your computer, or, in DOS, type Dir > Prn at the DOS prompt. The computer port that the printer is connected to is not configured or is not working properly. Run another peripheral connected to this port to check the port operation. The printer has not been correctly named for your network or Macintosh computer. Use the appropriate utility to name the printer on the network. For Macintosh computers, name the printer from within the Chooser menu. EN Chapter 9 151