HP 4500 HP Color LaserJet 4500, 4500 N, 4500 DN Printer - User Guide, C4084-90 - Page 132
XG XG - fan
View all HP 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Printer Control Panel Messages (continued) Message Description Recommended Action 57.X FAN ERROR 57.3 FAN ERROR alternates with CLOSE UPPER FRONT DRAWER 62 NO SYSTEM 62.X PRINTER ERROR An error has occurred where X is indicated below: X Description 1 Fan motor 1 malfunction 2 Fan motor 2 malfunction Clear the error by turning the printer off and then on. If the problem persists, call service. The upper front drawer may not be Verify that the upper front completely closed preventing a drawer is completely closed. connection to fan motor 3. There is a printer firmware error. Clear the error by turning the printer off and then on. If the problem persists, call service. Indicates a problem with internal Clear the error by turning the memory. X indicates the location as printer off and then on. If the follows: problem persists, call service. 68 NVRAM ERROR CHECK SETTINGS alternates with PRESS GO TO CONTINUE 68 NVRAM FULL CHECK SETTINGS alternates with PRESS GO TO CONTINUE 79 SERVICE (XXXX) PRINTER ERROR 8X SERVICE (XXXX) EIO ERROR X Description 0 Internal memory 1 Memory in DIMM slot 1 2 Memory in DIMM slot 2 3 Memory in DIMM slot 3 One or more settings saved in the non-volatile storage device are invalid. Some settings may have been reset to factory defaults. Check printer settings to determine which values have changed. Clear the message by pressing GO. If the problem persists, call service. Indicates that a non-volatile storage Check printer settings to device is full. Some settings may determine which values have have been reset to factory defaults. changed. Clear the message by pressing GO. If the problem persists, call service. A hardware error has occurred. The Clear the error by turning the XXXX indicates the error type. printer off and then on. If the problem persists, call service. A critical EIO failure has occurred. X indicates the slot number of the device. XXXX indicates the error type. Clear the error by turning the printer off and then on. If the problem persists, call service. 132 Printer Control Panel Messages EN