HP 5500hdn HP Color LaserJet 5500 series printer - User Guide - Page 127
EN_WW, Control panel messages, OUT OF RANGE
View all HP 5500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Control panel message CPR SENSOR OUT OF RANGE DATA RECEIVED To print last page press Deleting... DISK DEVICE FAILURE alternates with Ready For menus press DISK FILE OPERATION FAILED alternates with Ready For menus press DISK FILE SYSTEM IS FULL alternates with Ready For menus press DISK IS WRITE PROTECTED alternates with Ready For menus press Doors open. Test aborted. EIO DISK X initializing EIO DISK X NOT FUNCTIONAL For help press EIO DISK X spinning up Description Recommended action A color plane registration (CPR) error 1. Force a calibration by selecting Calibrate was detected during calibration. Now from from the Print Quality menu. 2. If the message persists, contact HP Support. The printer received data and is waiting for a form feed. When the printer receives another file, the message should disappear. Press to continue. The printer is currently deleting the No action necessary. stored job. A device failure has occurred on the 1. Printing may continue for jobs that do not specified drive. require access to the disk drive. 2. To clear the message, turn the printer off and then back on. 3. If the message persists, remove and re-install the EIO disk drive. 4. If the message persists, replace the EIO disk drive. The printer received a PJL file system command that attempted to perform an illogical operation (for example, to download a file to a non-existent directory). 1. Printing may continue. 2. Turn the printer off and then back on. 3. If the message reappears, there may be a problem with the software application. The printer received a PJL file system command that attempted to store something on the file system but was unsuccessful because the file system is full. 1. Use the HP Web Jetadmin software to delete files from the EIO disk drive and try again. 2. To remove this message from the display, turn the printer off and then back on. The file system device is protected and no new files can be written to it. 1. To enable writing to the disk, turn off write protection, using HP Web Jetadmin. 2. To remove this message from the display, turn the printer off and then back on. A printer door has been opened during a test. The test has been aborted. The EIO disk device in slot X is initializing. Close the door and restart the test. No action necessary. The EIO disk in slot X is not working Remove the EIO disk from the slot indicated correctly. and replace with a new EIO disk drive. The EIO disk device in slot X is spinning up its platter. No action necessary. EN_WW Control panel messages 117