HP 5500hdn HP Color LaserJet 5500 series printer - User Guide - Page 49
PowerSave Time, To set PowerSave Time, To disable/enable PowerSave
View all HP 5500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Note 10. Press or to select ALWAYS or UNLESS LOADED. 11. Press to set the behavior. 12. Press PAUSE/RESUME. PowerSave Time The adjustable PowerSave Time feature reduces power consumption when the printer has been inactive for an extended period. You can set the length of time before the printer goes into PowerSave mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, or to 1 HOUR, 1.5 HOURS, 2 HOURS, or 4 HOURS. The default setting is 30 MINUTES. The printer display dims when the printer is in PowerSave mode. PowerSave mode does not affect printer warm-up time unless the printer was in PowerSave mode for more than 8 hours. To set PowerSave Time 1. Press to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight POWERSAVE TIME. 7. Press to select POWERSAVE TIME. 8. Press or to select the appropriate time period. 9. Press to set the time period. 10. Press PAUSE/RESUME. To disable/enable PowerSave 1. Press to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight RESETS. 5. Press to select RESETS. 6. Press to highlight POWERSAVE. 7. Press to select POWERSAVE. 8. Press or to select ON or OFF. 9. Press to set the selection. 10. Press PAUSE/RESUME. EN_WW Changing printer control panel configuration settings 39