HP 5500hdn HP Color LaserJet 5500 series printer - User Guide - Page 137
Replace Transfer Kit, Replace Supplies
![]() |
View all HP 5500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Control panel message REPLACE SUPPLIES For status press REPLACE TRANSFER KIT For help press Request accepted Please wait Resend upgrade Resetting factory settings Resetting kit count Restoring last saved state Rotating cartridge motor To exit press Cancel Job key Rotating... alienation motor To exit press Cancel Job key Description Recommended action At least one supply item is out and needs to be replaced and another supply item is either out or low. 1. Press to identify which supplies should be replaced. 2. Press for help. 3. Follow the instructions on the display to locate and replace the identified supply. 4. Press and to step through the instructions. 5. To exit help, press . Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. The transfer unit is at end of life. 1. Press for help. 2. Follow the instructions on the display to locate and install the transfer kit. 3. Answer Yes to the question, Is this a new transfer kit? 4. Press and to step through the instructions. 5. To exit help, press . Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. The printer has accepted a request to print an internal page, but the current job must finish printing before the internal page will print. No action necessary. The firmware upgrade was not completed successfully. Attempt upgrade again. You may need to use the parallel port to send the upgrade file. The printer is restoring factory settings. No action necessary. YES was selected in the Reset Supplies menu to reset the counts for any of the supplies that cannot be detected as new. No action necessary. The printer is restoring the last saved No action necessary. state. A component test is in progress; the component selected is Cartridge motor. Press CANCEL JOB when ready to stop this test. The printer is executing a Component Press CANCEL JOB when ready to stop this test. Test and the component selected is alienation motor. EN_WW Control panel messages 127
![](/manual_guide/products/hewlettpackard-5500n-hp-color-laserjet-5500-series-printer-user-guide-4d8391d/137.png)