HP 5500hdn HP Color LaserJet 5500 series printer - User Guide - Page 51

Auto continue, To set the auto continue, Supplies low, To set supplies low reporting

Page 51 highlights

Auto continue You can determine printer behavior when the system generates an Auto Continuable error. ON is the default setting. • ON displays an error message for ten seconds before automatically continuing to print. • OFF pauses printing any time the printer displays an error message and until you press . To set the auto continue 1. Press to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight AUTO CONTINUE. 7. Press to select AUTO CONTINUE. 8. Press or to select the appropriate setting. 9. Press to set the selection. 10. Press PAUSE/RESUME. Supplies low The printer allows two options for reporting that supplies are low; CONTINUE is the default value. • CONTINUE allows the printer to continue printing while displaying a warning until the supply is replaced. • STOP causes the printer to pause printing until you replace the used supply or press , which allows the printer to print while continuing to display the warning. To set supplies low reporting 1. Press to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight SUPPLIES LOW. 7. Press to select SUPPLIES LOW. 8. Press or to select the appropriate setting. 9. Press to set the selection. 10. Press PAUSE/RESUME. EN_WW Changing printer control panel configuration settings 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224

Auto continue
You can determine printer behavior when the system generates an Auto Continuable error.
ON
is the default setting.
ON
displays an error message for ten seconds before automatically continuing to print.
OFF
pauses printing any time the printer displays an error message and until you press
.
To set the auto continue
1.
Press
to enter the
MENUS
.
2.
Press
to highlight
CONFIGURE DEVICE
.
3.
Press
to select
CONFIGURE DEVICE
.
4.
Press
to highlight
SYSTEM SETUP
.
5.
Press
to select
SYSTEM SETUP
.
6.
Press
to highlight
AUTO CONTINUE
.
7.
Press
to select
AUTO CONTINUE
.
8.
Press
or
to select the appropriate setting.
9.
Press
to set the selection.
10. Press
P
AUSE
/R
ESUME
.
Supplies low
The printer allows two options for reporting that supplies are low;
CONTINUE
is the default
value.
CONTINUE
allows the printer to continue printing while displaying a warning until the
supply is replaced.
STOP
causes the printer to pause printing until you replace the used supply or press
,
which allows the printer to print while continuing to display the warning.
To set supplies low reporting
1.
Press
to enter the
MENUS
.
2.
Press
to highlight
CONFIGURE DEVICE
.
3.
Press
to select
CONFIGURE DEVICE
.
4.
Press
to highlight
SYSTEM SETUP
.
5.
Press
to select
SYSTEM SETUP
.
6.
Press
to highlight
SUPPLIES LOW
.
7.
Press
to select
SUPPLIES LOW
.
8.
Press
or
to select the appropriate setting.
9.
Press
to set the selection.
10. Press
P
AUSE
/R
ESUME
.
EN_WW
Changing printer control panel configuration settings
41