HP Brio 81XX hp brio 81xx, advanced setup guide - Page 50
Command, Description, conversation. Example: ATDT123456;H.
View all HP Brio 81XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4 Business Communications Options Basic AT Commands Command ATDn ATEn ATHn Description Tells the modem to go online and dial (automatic dialing). The following characters are authorized as parameters in the dialing sequence: 0 to 9 - For the telephone numbers. P - For pulse dialing. T - For touch tone dialing. W - Tells modem to wait until it hears the line free signal (for use with branch exchanges). S=n - Dials the number stored in register n (where n is a number from 0 to 3). ! - Calls exchange by flash. ^ - Switches off calling tone (during current dialing process). ;H - Terminates the dialing sequence and causes the modem to go offline after dialing so that you can conduct a normal voice conversation. Example: ATDT123456;H. , - Pauses the register (S8) time. @ - Waits for 5 seconds of silence. ; - Stays in Command Mode after dialing. Controls the Echo function, where n is either 0 or 1: 1 - Enables character echo so that modem commands appear on screen as they are entered. 0 - Disables the echo function. Where n is either 0 or 1: 0 - Forces modem on-hook. 1 - Forces modem off-hook. 50