Home » HP Manuals » Multifunction Devices » HP DeskJet Ink Advantage 5200 » Manual Viewer

HP DeskJet Ink Advantage 5200 User Guide - Page 118

Run the fax test, What to do if the fax test failed, Setup, Setup Wizard, HP Utility

View all HP DeskJet Ink Advantage 5200 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

Run the fax test You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing. Perform this test only after you have completed fax setup on the printer. The test does the following: ● Tests the fax hardware ● Verifies that the correct type of phone cord is connected to the printer ● Checks that the phone cord is plugged into the correct port ● Checks for a dial tone ● Tests the status of your phone line connection ● Checks for an active phone line To test fax setup via the printer control panel 1. Set up the printer for faxing according to your particular home or office setup instructions. 2. Make sure the ink cartridges are installed and that full-size paper is loaded in the input tray before starting the test. 3. On the Fax screen, touch Setup , touch Setup Wizard, and then follow the onscreen instructions. The printer displays the status of the test on the display and prints a report. 4. Review the report. ● If the fax test failed, review the solutions below. ● If the fax test passed and you are still having problems faxing, verify that the fax settings listed in the report are correct. You can also use HP's online troubleshooting wizard. What to do if the fax test failed If you ran a fax test and the test failed, review the report for basic information about the error. For more detailed information, check the report to see which part of the test failed, and then review the appropriate topic in this section for solutions to try. The "Fax Hardware Test" failed ● Turn the printer off by pressing (Power button) located on the printer control panel and then unplug the power cord from the back of the printer. After a few seconds, plug the power cord in again, and then turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting information in this section. ● Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be a problem. ● If you are running the test from the Fax Setup Wizard (Windows) or HP Utility (OS X and macOS), make sure the printer is not busy completing another task, such as receiving a fax or making a copy. Check the display for a message indicating that the printer is busy. If it is busy, wait until it is finished and in the idle state before running the test. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready for faxing. If the Fax Hardware Test continues to fail and you experience problems faxing, contact HP 112 Chapter 10 Solve a problem ENWW

Section	Page
How do I?	7
Get started	8
Accessibility	8
HP EcoSolutions (HP and the Environment)	8
Manage power	9
Quiet Mode	10
Optimize Printing Supplies	11
Printer parts	11
Control panel and status lights	13
Overview of buttons and lights	13
Control panel display icons	14
Change printer settings	15
Paper basics	15
Recommended papers for printing	16
Order HP paper supplies	17
Tips for selecting and using paper	17
Load media	17
Load original	22
Update the printer	24
Open the HP printer software (Windows)	25
Use the HP Smart app to print, scan, and troubleshoot from an iOS, Android, or Windows 10 device	25
Turn the printer off	26
Print	27
Print using the HP Smart app	27
Print documents using HP printer software	28
Print photos using HP printer software	29
Print on envelopes	30
Print on both sides (duplexing)	31
Print from apps on mobile devices	31
Print from apps on mobile devices	31
Access printer features and troubleshooting information from mobile devices	32
Print using the maximum dpi	32
Tips for successful printing	33
Copy and scan	36
Copy	36
Scan	36
Scan using the HP Smart app	37
Scan from a Windows 10 device	37
Scan from an Android or iOS device	38
Scan using HP printer software	38
Scan to a computer	39
Scan to email	40
Create a new scan shortcut (Windows)	40
Change scan settings (Windows)	40
Scan from the printer control panel	41
Scan using Webscan	41
Tips for copy and scan success	42
Fax	43
Send a fax	43
Send a standard fax	43
Send a standard fax from the computer	44
Send a fax from a phone	45
Send a fax using monitor dialing	45
Send a fax using printer memory	46
Send a fax to multiple recipients	46
Send a fax in Error Correction Mode	47
Receive a fax	47
Receive a fax manually	48
Set up backup fax	48
Reprint received faxes from memory	49
Forward faxes to another number	49
Set automatic reduction for incoming faxes	50
Block unwanted fax numbers	50
Receive faxes using HP Digital Fax	51
Set up phone book contacts	52
Create and edit a phone book contact	52
Create and edit a group phone book contact	53
Delete phone book contacts	54
Change fax settings	54
Configure the fax header	54
Set the answer mode (Auto answer)	54
Set the number of rings before answering	55
Change the answer ring pattern for distinctive ring	55
Set the dial type	56
Set the redial options	56
Set the fax speed	57
Set the fax sound volume	57
Fax and digital phone services	58
Fax on Voice over Internet Protocol	58
Use reports	58
Print fax confirmation reports	59
Print fax error reports	60
Print and view the fax log	60
Clear the fax log	60
Print the details of the last fax transaction	60
Print a Caller ID Report	61
View the Call History	61
Additional fax setup	61
Set up faxing (parallel phone systems)	61
Select the correct fax setup for your home or office	63
Case A: Separate fax line (no voice calls received)	64
Case B: Set up the printer with DSL	65
Case C: Set up the printer with a PBX phone system or an ISDN line	66
Case D: Fax with a distinctive ring service on the same line	66
Case E: Shared voice/fax line	67
Case F: Shared voice/fax line with voice mail	69
Case G: Fax line shared with computer modem (no voice calls received)	69
Set up the printer with a computer dial-up modem	70
Set up the printer with a computer DSL/ADSL modem	71
Case H: Shared voice/fax line with computer modem	72
Shared voice/fax with computer dial-up modem	72
Shared voice/fax with computer DSL/ADSL modem	73
Case I: Shared voice/fax line with answering machine	75
Case J: Shared voice/fax line with computer modem and answering machine	76
Shared voice/fax line with computer dial-up modem and answering machine	76
Shared voice/fax line with computer DSL/ADSL modem and answering machine	78
Case K: Shared voice/fax line with computer dial-up modem and voice mail	79
Test fax setup	81
Web Services	82
What are Web Services?	82
Set up Web Services	82
Print with HP ePrint	83
Remove Web Services	84
Work with cartridges	85
Information on cartridges and the printhead	85
Check the estimated ink levels	85
Replace the cartridges	86
Order cartridges	88
Use single-cartridge mode	88
Store printing supplies	89
Cartridge warranty information	89
Network setup	90
Set up the printer for wireless communication	90
Before you begin	90
Set up the printer on your wireless network	91
Change the connection type	91
Test the wireless connection	92
Turn on or off the wireless capability of the printer	93
Change network settings	93
Use Wi-Fi Direct	94
Printer management tools	98
The HP Smart app	98
Toolbox (Windows)	98
HP Utility (OS X and macOS)	98
Embedded web server	99
About cookies	99
Open the embedded web server	99
Embedded web server cannot be opened	100
Solve a problem	102
Jams and paper-feed issues	102
Clear a paper jam	102
Read general instructions in the Help for clearing paper jams	102
Clear a print carriage jam	106
Read general instructions in the Help for clearing a print carriage jams	106
Learn how to avoid paper jams	107
Solve paper-feed problems	107
Ink cartridge issues	108
Printing issues	109
Fix problems with page not printing (unable to print)	109
Read general instructions in the Help for unable to print issues	109
Fix print quality issues	113
Read general instructions in the Help for resolving print quality issues	113
Copy issues	117
Scan issues	117
Fax issues	117
Run the fax test	118
What to do if the fax test failed	118
Troubleshoot fax problems.	122
Read general instructions in the Help for specific fax problems	122
The display always shows Phone Off Hook	122
The printer is having problems sending and receiving faxes	122
The printer cannot receive faxes, but can send faxes	124
The printer cannot send faxes, but can receive faxes	125
Fax tones are recorded on my answering machine	125
Network and connection issues	125
Fix wireless connection	125
Find network settings for wireless connection	126
Fix Wi-Fi Direct connection	126
Printer hardware issues	127
Get help from the printer control panel	127
Get help from the HP Smart app	128
Understand printer reports	128
Printer status report	128
Network configuration page	128
Print quality report	129
Wireless test report	129
Web access test report	129
Solve problems using Web Services	129
Maintain the printer	130
Clean the scanner glass	130
Clean the exterior	131
Clean the document feeder	131
Restore original factory defaults and settings	132
HP support	132
Technical information	134
HP Company notices	134
Specifications	134
System requirements	135
Environmental specifications	135
Print specifications	135
Scan specifications	135
Copy specifications	135
Cartridge yield	135
Print resolution	135
Acoustic information	136
Regulatory notices	136
Regulatory model identification number	136
FCC statement	136
Notice to users in Korea	137
VCCI (Class B) compliance statement for users in Japan	137
Notice to users in Japan about the power cord	137
Noise emission statement for Germany	137
European Union Regulatory Notice	138
Products with wireless functionality	138
European telephone network declaration (Modem/Fax)	138
Visual display workplaces statement for Germany	139
Notice to users of the U.S. telephone network: FCC requirements	139
Notice to users of the Canadian telephone network	140
Notice to users of the German telephone network	140
Australia wired fax statement	140
Declaration of conformity	141
Declaration of conformity	142
Regulatory information for wireless products	144
Exposure to radio frequency radiation	144
Notice to users in Canada (5 GHz)	144
Notice to users in Brazil	144
Notice to users in Canada	145
Notice to users in Taiwan	145
Notice to users in Mexico	145
Notice to users in Japan	146
Notice to users in Korea	146
Notice to users in Serbia (5 GHz)	146
Notice to users in Taiwan (5 GHz)	146
Notice to users in Thailand (5 GHz)	146
Environmental product stewardship program	146
Eco-Tips	147
European Union Commission Regulation 1275/2008	147
Paper	147
Plastics	147
Safety data sheets	147
Recycling program	147
HP inkjet supplies recycling program	148
Power consumption	148
Disposal of waste equipment by users	148
Chemical substances	148
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan)	149
The Table of Hazardous Substances/Elements and their Content (China)	150
Restriction of hazardous substance (Ukraine)	150
Restriction of hazardous substance (India)	150
Restriction on hazardous substances statement (Turkey)	151
EPEAT	151
SEPA Ecolabel User Information (China)	151
China Energy Label for Printer, Fax and Copier	151
Battery disposal in Taiwan	152
European Union Battery Directive	152
Battery notice for Brazil	152
California Perchlorate Material Notice	152
Waste disposal for Brazil	152

Match case Limit results 1 per page

Run the fax test

You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing.

Perform this test only after you have completed fax setup on the printer. The test does the following:

●

Tests the fax hardware

●

Veriﬁes

that the correct type of phone cord is connected to the printer

●

Checks that the phone cord is plugged into the correct port

●

Checks for a dial tone

●

Tests the status of your phone line connection

●

Checks for an active phone line

To test fax setup via the printer control panel

Set up the printer for faxing according to your particular home or

oﬀice

setup instructions.

Make sure the ink cartridges are installed and that full-size paper is loaded in the input tray before

starting the test.

On the

Fax

screen, touch

Setup

, touch

Setup Wizard

, and then follow the onscreen instructions.

The printer displays the status of the test on the display and prints a report.

Review the report.

●

If the fax test failed, review the solutions below.

●

If the fax test passed and you are still having problems faxing, verify that the fax settings listed in

the report are correct. You can also use HP's online troubleshooting wizard.

What to do if the fax test failed

If you ran a fax test and the test failed, review the report for basic information about the error. For more

detailed information, check the report to see which part of the test failed, and then review the appropriate

topic in this section for solutions to try.

The "Fax Hardware Test" failed

●

Turn the printer

oﬀ

by pressing

(Power button) located on the printer control panel and then unplug

the power cord from the back of the printer. After a few seconds, plug the power cord in again, and then

turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting

information in this section.

●

Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be

a problem.

●

If you are running the test from the

Fax Setup Wizard

(Windows) or

HP Utility

(OS X and macOS), make

sure the printer is not busy completing another task, such as receiving a fax or making a copy. Check the

display for a message indicating that the printer is busy. If it is busy, wait until it is

ﬁnished

and in the

idle state before running the test.

●

If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that

plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the

telephone wall jack.

After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready

for faxing. If the

Fax Hardware Test

continues to fail and you experience problems faxing, contact HP

112

Chapter 10

Solve a problem

ENWW