HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 134
The Power Meter Readings has two s: Power Meter Readings and 24-hour Power
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Power meter readings is a licensed feature and requires the Advanced Pack license to see the Power Regulator graphs from the iLO 2 web GUI. The license key also enables iLO 2 to share information with Insight Power Manager. NOTE: You can obtain an instant power reading without a license key through the CLI using the PS command. The Power Meter Readings page has two sections: Power Meter Readings and 24-hour Power History. NOTE: Depending on your server, this page might look slightly different. Figure 8-19 Power Meter Readings Page NOTE: The BL c-Class tab is available only on HP Integrity server blades. IMPORTANT: Power consumption data readings are dependent on the configuration, architecture, components, and levels of activity of the server at any given time. Table 8-20 lists the fields, buttons, and descriptions. Table 8-20 Power Meter Readings Page Description Fields and Buttons Power Meter Readings Peak Average Description Data is displayed using a bar graph. Each bar represents the power usage taken over a five minute interval. Peak and average power usage are displayed by default. You can display or hide peak, average, and minimum power samples by using the appropriate checkbox. Samples are collected over a 24-hour period. Samples are not retained over a management processor or server reset. Data can be displayed in Watts or Btu/hr. To display a tool tip that indicates the power usage, power regulator mode, temperature, and timestamp, pause the mouse over the particular sample on the bar graph. Displays the peak power reading from the server over the last 24-hour period. Displays the average power reading from the server over the last 24-hour period. 134 Using iLO 2