HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 170
SM CLP Network Command Examples, To modify a Static IP Address and Subnet Mask
![]() |
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Table 8-52 shows dnssettings1 target properties. Table 8-52 dnssettings1 Properties Property Name DNSServerAddress Description Contains the IP addresses of the primary, secondary, and tertiary DNS servers. Access and Values Read/write This is an array property. The value of each element of this property must be expressed in dotted decimal notation. The elements of the property are separated by commas (DNSServerAddressess=192.0.2.1, 192.0.2.2, 192.0.2.3 means that the IP addresses of the primary, secondary and tertiary DNS servers are set to 192.0.2.1, 192.0.2.2, 192.0.2.3 respectively). DomainName iLO 2 domain name. Read/write RegisterThisConnections Address Indicates whether iLO 2 registers with the DDNS server. Read/write. The following are valid values: Yes: register with DDNS server. No: do not register with DDNS server. RequestedHostName iLO 2 host name. Read/write. Verbs cd help show set Changes the current default target. Displays context-sensitive help. Displays information. Sets a property to a specific value. SM CLP Network Command Examples The following examples list specific network commands. Determine the iLO 2 MP MAC Address hpiLO-> show -d properties=macaddress /map1/enetport1/lanendpt1 or hpiLO-> show -d properties=permanentaddress /map1/enetport1/ Determine current IP Address hpiLO-> show -d properties=ipv4address /map1/enetport1/lanendpt1/ipendpt1 Determine Subnet Mask hpiLO-> show -d properties=subnetmask /map1/enetport1/lanendpt1/ipendpt1 Set IP Address and Subnet Mask To modify a Static IP Address and Subnet Mask, set IPv4Address and SubnetMask properties of the ipendpt1 target: hpiLO-> set /map1/enetport1/lanendpt1/ipendpt1 ipv4address=192.0.2.1 subnetmask=255.255.255.0 Determine Gateway Address hpiLO-> show -d properties=accessinfo /map1/enetport1/lanendpt1/ipendpt1/gateway1 Set Gateway Address 170 Using iLO 2
![](/manual_guide/products/hewlettpackard-integrity-bl870c-hp-integrity-ilo-2-operations-guide-eleventh-edition-30e0a7d/170.png)