HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 168
Target: map1/dhcpendpt1, Disables iLO 2 DHCP.
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Table 8-47 ipendpt1 Properties Property Name IPv4Address SubnetMask AddressOrigin Description Access and Values iLO 2 MP IP address. Read/write The value of the property must be expressed in dotted decimal notation. iLO 2 MP subnet mask. Read/write The value of the property must be expressed in dotted decimal notation. Indicates the configuration method Read-only that resulted in the configuration being The following are valid values: assigned to this ipendpt. Static: The iLO 2 MP IP address and subnet mask were assigned statically. DHCP: The iLO 2 MP IP address and subnet mask were acquired using DHCP. Verbs cd help show set Changes the current default target. Displays context-sensitive help. Displays information. Sets a property to a specific value. Target: map1/dhcpendpt1 The dhcpendpt1 target represents the iLO 2 DHCP client. Table 8-48 shows dhcpendpt1 target properties. Table 8-48 dhcpendpt1 Properties Property Name EnabledState Description Access and Values Represents the state of iLO 2 Read-only DHCP. The following are valid values: Enabled: The iLO 2 DHCP client is enabled. Disabled: The iLO 2 DHCP client is disabled. OtherTypeDescription Textual description of this Read-only protocol endpoint. Set to DHCP. Verbs cd help show start stop Changes the current default target. Displays context-sensitive help. Displays information. Enables iLO 2 DHCP. Disables iLO 2 DHCP. Target: map1/dnsendpt1 The dnsendpt1 target represents the iLO 2 DNS client. Table 8-49 shows dnsendpt1 target properties. 168 Using iLO 2