HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 166
Telnet Examples, SSH, Target: map1/sshsvc1, SSH Examples, Network Configuration
![]() |
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Telnet Examples The following examples show specific Telnet commands. Enable Telnet Service -> start /map1/telnetsvc1 Disable Telnet Service -> stop /map1/telnetsvc1 SSH This section describes targets, their properties, and supported verbs necessary to enable or disable SSH access to iLO 2. Target: map1/sshsvc1 The sshsvc1 target represents the SSH service provided by map1. Table 8-44 shows sshsvc1 target properties. Table 8-44 sshsvc1 Properties Property Name EnabledState Description Shows whether SSH service is enabled or disabled. Access and Values Read-only The following are valid values: Enabled, Disabled Protocol The protocol this service provides. Read-only Set to SSH. Verbs start stop show help Enables iLO 2 SSH service. Disables iLO 2 SSH service. Displays information. Displays context-sensitive help. SSH Examples The following examples show specific SSH commands. Enable SSH Service -> start /map1/sshsvc1 Disable SSH Service -> stop /map1/sshsvc1 Network Configuration Network commands enable you to display or modify network settings. SM CLP Network Targets, Properties, and Verbs This section describes targets, target properties, and supported verbs necessary to implement the iLO 2 network configuration through SM CLP. Target: map1/enetport1 The enetport1 target represents capabilities and management of the iLO 2 MP Ethernet port. Table 8-45 shows enetport1 target information. 166 Using iLO 2
![](/manual_guide/products/hewlettpackard-integrity-bl870c-hp-integrity-ilo-2-operations-guide-eleventh-edition-30e0a7d/166.png)