HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 167
Target: map1/enetport1/lanendpt1, target represents the iLO 2 LAN endpoint settings.
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Table 8-45 enetport1 Properties Property Name AutoSense PermanentAddress Description Access and Values Specified if the iLO 2 AutoSense feature is Read/write enabled. If it is disabled, iLO 2 network Boolean values accepted. speed is set to 10 mb/s. Represents iLO 2 MP MAC address. Read-only The iLO 2 MP MAC address is formatted as twelve hexadecimal digits (10203040506) with each pair representing one of the six octets of the MAC address. Verbs cd help show set Changes the current default target. Displays context-sensitive help. Displays information. Sets a property to a specific value. Target: map1/enetport1/lanendpt1 The lanendpt1 target represents the iLO 2 LAN endpoint settings. Table 8-46 shows lanendpt1 target properties. Table 8-46 lanedpt1 Properties Property Name Description EnabledState Represents the iLO 2 MP LAN state. Access and Values Read-only The following are valid values: Enabled, Disabled MACAddress Represents the iLO 2 MP MAC address. Read-only The MAC address is formatted as twelve hexadecimal digits (010203040506), with each pair representing one of the six octets of the MAC address. Verbs cd help show Changes the current default target. Displays context-sensitive help. Displays information. Target: map1/enetport1/lanendpt1/ipendpt1 The ipendpt1 target represents the iLO 2 MP IP endpoint settings. Table 8-47 shows ipendpt1 target properties. SMASH Server Management Command Line Protocol 167