HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 62
IMPORTANT, PCI-X or PCI-X/PCIe Card Cage Common to all supported servers
![]() |
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
IMPORTANT: The HP Integrity rx8640 and rx7640 midrange servers support only one Lights-Out Advanced KVM card per partition, and the card must be installed in an I/O chassis with a core I/O card installed. If you install multiple Lights-Out Advanced KVM cards on one partition, only the first card that is detected is fully enabled. Subsequent cards will have only USB functionality enabled. IMPORTANT: The graphics functionality of the Lights-Out Advanced KVM card also takes precedence over the A6869B graphics/USB PCI card. If both a Lights-Out Advanced KVM card and an A6869B card are present on a partition, the A6869B card has only USB functionality enabled. HP recommends removing the A6869B card if you have both cards installed on a partition. Figure 5-1 PCI-X or PCI-X/PCIe Card Cage (Common to all supported servers) 1 PCI-X/PCIe Cards 2 PCI-X or PCIe Backplane IMPORTANT: Cabling requirements: • You must connect the LAN port on the Lights-Out Advanced KVM card to the same network as the MP LAN port on the server. • You need a network cable to your regular core I/O MP port - one per complex. • You need one network cable to each Lights-Out Advanced KVM card. To install the Lights-Out Advanced KVM card, perform the following steps: 1. Shut down the nPartition and power-off the appropriate PCI power domain. 2. Locate an empty mode-1 PCI-X slot where the card will be installed. 62 Adding Advanced Features
![](/manual_guide/products/hewlettpackard-integrity-bl870c-hp-integrity-ilo-2-operations-guide-eleventh-edition-30e0a7d/62.png)