HP Integrity BL870c HP Integrity iLO 2 Operations Guide, Eleventh Edition - Page 146
Network Settings, Network Settings > Standard, Table 8-28 Current LDAP Parameters Description
View all HP Integrity BL870c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Table 8-28 Current LDAP Parameters Page Description (continued) Submit Cancel Field Submits the information. Cancels the action. Description Network Settings The Network Settings tab enables you to access the following pages: • Standard • Domain Name Server IMPORTANT: If you are connected through a network and you make any changes to DHCP status, IP address, subnet mask, or gateway IP address, iLO 2 automatically resets once you confirm the change. The automatic reset occurs only after a warning displays before you commit the changes. If you enter -nc, no warning displays and iLO 2 reboots. If you are connected through a serial console and you make any changes to DHCP status, IP address, subnet mask, or gateway IP address, iLO 2 alerts you to manually reset iLO 2. A warning about dropped network connections is sent prior to committing the change. The warning does not display if you enter -nc. If a firmware upgrade is in progress, the commitment phase to the LC command fails and indicates that an upgrade or reset is in progress and changes to the LC parameters are not made. Network Settings > Standard The Standard page (Figure 8-28) enables you to configure the network settings and LAN configuration. You must have iLO configuration access right to configure the network settings. NOTE: Depending on your server, this page might look slightly different. Figure 8-28 Standard Page 146 Using iLO 2