HP Integrity rx2800 Smart Setup Scripting Toolkit Administrator's Guide 4.0 - Page 49
continued, Reason, Message, Warning
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Table 6-3 hpacuscripting Error Codes (continued) Warning Code 2853 2854 2857 2861 2864 2865 2866 2867 2868 2877 2880 2882 3000 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 Message Reason Cannot change SSP settings The SSP settings cannot be changed for the controller or logical drive. Invalid SSP Adapter ID The adapter ID is not a valid adapter ID that was detected by the controller. Invalid Surface Scan Delay - Controller does not support The controller is not redundant or does not support redundancy redundancy settings settings. Invalid Preferred Path Mode The preferred path mode specified is not a valid preferred path mode, or the controller is not available. Invalid Preferred Path The preferred path specified is not a valid chassis slot for an available active controller, or the controller is not available. Failure opening capture file - text Failure opening input file - text Failure opening error file - text There are no suitable spares ACU found no drives that can be used as spares for the specified available array. Invalid Drive Type Specified - Invalid MNP delay The specified value for MNP delay is invalid. Invalid Option The value of the option supplied to this parameter is invalid. Command Failed The controller returned an error for a command. License Key Delete Failed ACU is unable to delete the license key. Invalid Sector Size - Cannot delete Array - Invalid Number of Parity - Groups Chassis name is too long - Chassis name is already in Another controller is already using the entered chassis name. use Auto Configure failed The Auto Configure mode was unable to complete auto configuration Cannot extend logical drive, - not enough free space for the requested size Cannot extend logical drive, - requested size is too small Cannot specify both SIZE and The input file cannot specify both a SIZE and SHRINKSIZE SHRINKSIZE parameter. Cannot shrink Array The array shrink operation was not successful. Cannot move Array The array move operation was not successful. hpacuscripting 49