HP Integrity rx2800 Smart Setup Scripting Toolkit Administrator's Guide 4.0 - Page 50
Reason, Message, Warning, Invalid Drive Cache setting.
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 6-3 hpacuscripting Error Codes (continued) Warning Code 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 Message Reason Invalid operation - Advanced The requested operation requires a valid license key to be entered. Pack support required Spare drives cannot be specified by a count in Reconfigure mode When in Reconfigure mode, the requested spare drives must be specified by their addresses. A simple count cannot be used. Disk drives cannot be specified by a count in Reconfigure mode When in Reconfigure mode, the requested data drives must be specified by their addresses. A simple count cannot be used. Invalid number of physical - disks Cannot create Array - no physical disks specified ACU cannot create an array unless physical disks are specified in the input file DRIVE parameter. SSP must be enabled in order For the specified operation, ACU requires SSP to be supported to perform this operation and enabled. Invalid connection name - The connectionname cannot - be removed when the hostmode has a nondefault value. Invalid Host Mode - Invalid Adapter ID - This controller does not - have host mode modification capability You need to have - administrator rights to continue. Another instance of ACU is - already running (possibly a service). Please terminate the ACU application before running ACU scripting. Invalid Drive Cache setting. - Valid options are ENABLE and DISABLE. Invalid or out of order Command Verify the ordering of the commands in the input configuration file. Inavlid or missing Array for Expecting a valid array in Reconfigure mode. Reconfigure 50 Utilities reference