HP K550 User's Guide - Page 27
Loading media, with the right and back edges of the tray - alignment
UPC - 882780070127
View all HP K550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Loading media This section provides instructions for loading media into the printer. To load tray 1 or tray 2 1. Pull the tray out of the printer by grasping under the front of the tray. 2. For paper longer than 11 inches (279 mm), lift the front cover of the tray (see shaded tray part) and lower the front of the tray. 3. Insert the paper print-side down along the right of the tray. Make sure the stack of paper aligns with the right and back edges of the tray, and does not exceed the line marking in the tray. NOTE Tray 2 can be loaded only with plain paper. 4. Slide the paper guides in the tray to adjust them for the size that you have loaded. ENWW Loading media 19
Loading media
This section provides instructions for loading media into the printer.
To load tray 1 or tray 2
1.
Pull the tray out of the printer by grasping under the front of the tray.
2.
For paper longer than 11 inches (279 mm), lift the front cover of the tray (see shaded tray part)
and lower the front of the tray.
3.
Insert the paper print-side down along the right of the tray. Make sure the stack of paper aligns
with the right and back edges of the tray, and does not exceed the line marking in the tray.
NOTE
Tray 2 can be loaded only with plain paper.
4.
Slide the paper guides in the tray to adjust them for the size that you have loaded.
ENWW
Loading media
19